 |
 |
 |
| HOME | PRODUCTS | FORUM | RESOURCES | KIT COMPARISON | FREQUENTLY ASKED QUESTIONS | |||
|---|---|---|---|---|---|---|---|---|
| GALLERY | HISTORY | VO THEORY | SYSTEM | MEDIA | CONTACT | |||
|
|||||||||||||||||||||
|
#1
05-07-2006, 10:36 PM
|
||||
|
||||
Vacuum dewatering, another ?
OK, got my freezer compressor connected to my hot water heater with a 240v, 4500w element running on 120v generating oil temps around 145°F. With the compressor running and pulling 25-27 inHG vacuum and oil heated, how long do I need to pull a vacuum on a tankful? Till steam quits comming out of the compressor exhaust or a certain amount of time?
 I tested first batch with the pan test and no bubbles to 330°F 
__________________
www.huskyfreighters.com Happiness is a full tank of hot, dry? WVO! Go ahead, drill a hole in it, IT'S JUST A CAR!  (On modifying my super clean '83 300D to accept the Frybrid kit) '83 MB 300D Frybrid kit ~42000 miles '94 Chevy 3500 Crew Cab, auto, 40000 mi. '94 GMC Crew Cab, manual, wannabe '92 Chev 2500 Std cab, hope to be '88 Chevy Crew cab 6.2L homebuilt kit 40,000+miles on VO, returned to carnivore 
|
| Thread Tools | |
| Display Modes | |
|
|
Threaded Mode