HOME PRODUCTS FORUM RESOURCES KIT COMPARISON FREQUENTLY ASKED QUESTIONS  
GALLERY HISTORY VO THEORY SYSTEM MEDIA CONTACT  


Go Back   Forums
Register User's Gallery FAQ Members List Calendar Search Today's Posts Mark Forums Read

1994 Dodge Ram 2500 Frybrid Kit Install

• RideANeversummer's Gallery Hall • Gallery Home • Gallery List
RideANeversummer's Forums Photo Gallery
1994 Dodge Ram 2500
Frybrid Kit Install
Kit maker
  • Frybrid
Converter
  • Andrew Aslesen


I installed a Frybrid Kit on my 94' Dodge Ram with 314,000 on the ticker. I used a 55 Gallon RDS tank form Northern Tool. The VO filter is mounted to the driver's side fire wall. The final heat exchanger is mounted in front of the VO filter on the drivers side front inner fender. The selenoid valves are also located on the drivers side via a custome made bracket. It works out nice, because everything is on the driver's side, which is where it LP and IP are both located. The only thing I had to move was one little vaccume valve!
I found removing the inner fender and wheel priceless when doing the install.

This is the placement of most of the kit, without the fuel lines installed I found removing the inner fender and wheel priceless when doing the install. 55 gallon RDS tank.  Notice the snow in the background, it was pretty cold out. You gotta have fun while working in the garage
Click Thumbnail to Enlarge.

Gallery Statistics
Member: RideANeversummer
Created: 05-10-2007
08:43 AM
Last Modified: 12-17-2007
08:04 PM
Views: 2372
Images: 4
Comments: 2


Comments
Author Comment Date
GreaseStudent Would you please post some under hood photo's. Thanks 05-13-2007
RideANeversummer My Install 05-10-2007
Powered by: vBPicGallery


All times are GMT -8. The time now is 12:48 AM.


Powered by vBulletin® Version 3.7.2
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.